New Product Releases

Steering Column Support Bushing – Product Release!

Steering Column Support Bushing

Does your 74-89 911/912/930 have the common slop, wiggle and/or rattle in the steering wheel? This is a common issue with these cars and is the result of a worn-out OEM bearing liner. Rennline’s new Steering Column Support Bushing installs in about 15 minutes and leaves you with a smooth/quite steering column. This is a big improvement over the factory replacement sleeve that takes hours to replace and is sure to fail again down the road.

Materials

Nylon

Time

15 minute install

Fitment

911/912/930 1974-1989

Eliminate wiggle and rattle in your steering wheel

Images

Posted by admin in New Product Releases

Throttle Response Cam – Product Release!

Throttle Response Cam

Do you have a hard time modulating the throttle on your 944/924? You're not the only one! A common complaint with these cars is the large amount of travel required for relative minor changes in throttle position. Rennline has the solution with these billet throttle response cams. You will find throttle modulations and heel/toeing much easier with the addition of this simple part.

Materials

Billet Aluminum

Time

Installs in 5 minutes

Install

Includes All Necessary Hardware

Throttle Response Control From Rennline

Images

Posted by admin in New Product Releases

A/C & Tunnel Hole Block Off – Product Releases!

A/C and Tunnel Delete

If you've stripped the interior in your 65-89 911/912/930 then you've probably noticed the unsightly hole to the right of your throttle pedal. Drop something in there, and you've got a full day project ahead of you to fish it out. These block off plates are secured using self drilling screws, for a simple 2 minute installation. Likewise, If you've deleted your factory A/C then there's a good chance that you have a hole in your passenger's side footwell behind the floorboard. These block off plates are secured with screws through the existing holes in your footwell.

Materials

Aircraft Grade Aluminum

Color

Anodized Aluminum or Black Powder Coat

Install

Includes All Necessary Hardware

Installs in minutes for a seamless finish

Images

Posted by admin in New Product Releases

Sunroof Delete Panel – Product Release!

Sunroof Delete Panel

These hand formed Sunroof blockoff plates make replacing your sunroof a feasible option. Whether you're building a classic hotrod, or an all out track car, deleteing the sunroof will really clean up your ride while shaving 29lbs off the top of the car. These panels are made using an english wheel and feature the proper compound bend required to match the shape of your roof. They also include a flange which allows you to either spot weld, or panel bond this sunroof delete in place.

Materials

Hand formed steel

Fitment

Spot weld or panel bonded

Weight

29lbs of weight saving

Finally, a feasible option for deleting your classic 911 sunroof.

Images

Posted by admin in New Product Releases

Window Pivot Pins – Product Release!

Window Regular Pivot

If one or both of your door windows are no longer operable, there's a good chance the OEM pot metal pivot pin has sheared off. Rennline now offers the only heat treated pivot pin on the market. Typcially you need to know whether or not the slot is parallel to the notch on the back, but Rennline's pivot pins include both the parralel and perpendicular slots to reduce the chances of ordering the incorrect part. All you need to know is the length of your pivot pin before ordering. Alternatively, order both lengths and return the pin that you don't need. DH16 is 26mm, DH17 is 23mm.

Materials

Heat treated steel

Fitment

Both the parallel and perpendicular slots

Compatibility

26 & 23mm

Now offering the only heat treated replacement pivot pin on the market

Images

Posted by admin in New Product Releases